Polylactide‐perylene derivative for blue biodegradable organic light‐emitting diodes

In this work we demonstrate, for the first time, the use of polylactic acid (PLA) as a biodegradable host matrix for the construction of the active emissive layer of organic light‐emitting diode (OLED) devices for potential use in bioelectronics. In this preliminary study, we report a robust synthesis of two fluorescent PLA derivatives, pyrene‐PLA ( AH10 ) and perylene‐PLA ( AH11 ). These materials were prepared by the ring opening polymerisation of l ‐lactide with hydroxyalkyl‐pyrene and hydroxyalkyl‐perylene derivatives using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene as catalyst. OLEDs were fabricated from these materials using a simple device architecture involving a solution‐processed single‐emitting layer in the configuration ITO/PEDOT:PSS/PVK:OXD‐7 (35%): AH10 or AH11 (20%)/TPBi/LiF/Al (ITO, indium tin oxide; PEDOT:PSS, poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonic acid); PVK, poly(vinylcarbazole); OXD‐7, (1,3‐phenylene)‐bis‐[5‐(4‐tert‐butylphenyl)‐1,3,4‐oxadiazole]; TPBi, 2,2′,2″‐(1,3,5‐benzenetriyl)tris(1‐phenyl‐1H‐benzimidazole)). The turn‐on voltage for the perylene OLED at 10 cd m^–2 was around 6 V with a maximum brightness of 1200 cd m^–2 at 13 V. The corresponding external quantum efficiency and device current efficiency were 1.5% and 2.8 cd A^–1 respectively. In summary, this study provides proof of principle that OLEDs can be constructed from PLA, a readily available and renewable bio‐source. © 2020 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.     

化学微发泡成型外观表面技术研究

从汽车内饰轻量化方向考虑,研究了化学微发泡技术,从成核和气泡长大阶段进行研究,通过特殊的柔性后退core-back工艺,在充模过程中控制气泡的变形和破裂以保证成型制品的表面质量,实现化学微发泡成型制品无外观缺陷、质量减轻20%以上的目的。     

腔磁力系统中的诱导透明和快慢光传播

为了在腔磁力系统中实现可控的磁子诱导透明、磁力诱导透明以及快慢光传播,建立了一个混合腔磁力系统.该系统由一个含有YIG球的微波腔和在z方向对球施加一个均匀的偏置磁场组成,并用强泵浦场驱动磁子和弱探测场驱动微波腔.研究表明,通过调节腔与磁子之间的相互作用强度和微波腔与磁子的耗散比,可以增加磁子诱导透明(MIT)、磁力诱导透明(MMIT)的效果和提高快慢光传播的速度.该研究结果可为磁力诱导放大、量子光学操纵和量子信息存储以及灵敏光开关的研究提供参考.     

煤炭地下气化过程中温度场及其传热特征研究进展

煤炭地下气化(UCG)技术作为一种环境友好的采煤方法,可被用来开发深部煤层与矿井遗留的煤炭资源。当地下气化时,随着气化时间的推移,煤炭在煤层内部"燃烧"逐渐形成气化炉,炉内温度最高可达1 200℃。从UCG过程中的放热反应出发,综述了热量来源、温度场的变化及其传热特征等,总结了研究温度场的重要手段。分析认为,UCG是一个复杂的温热动态变化过程,在此过程中氧化还原反应、吸热和放热的可逆反应同时进行,导致了气化炉的温度场及其传热机制的复杂性。研究气化过程传热机制的方法主要有物理模拟、试验监测、理论计算和数值模拟4种,各自具有不同的适应性。其中,物理模拟的可操控性强,但是难以解决地层接触关系导致的接触热阻误差;试验监测能真实反映温度场等的变化情况,但是实际操作的经济性差;理论计算通过对气化过程的拆分,从理论角度定性定量了UCG的温度场特征,但理论计算难以考虑到温度渗流等对温度的影响;数值模拟借助计算机进行温度场的多场耦合,综合考虑了渗流、变形、温度等对传热的影响,但多场的物理耦合计算难度较大,且煤层及岩石的热物理性质随温度变化会产生较大的差异,导致数值建模的计算难度增加,制约了数值模拟方法的...     

Extraction of protein from food waste: An overview of current status and opportunities

The chief intent of this review is to explain the different extraction techniques and efficiencies for the recovery of protein from food waste (FW) sources. Although FW is not a new concept, increasing concerns about chronic hunger, nutritional deficiency, food security, and sustainability have intensified attention on alternative and sustainable sources of protein for food and feed. Initiatives to extract and utilize protein from FW on a commercial scale have been undertaken, mainly in the developed countries, but they remain largely underutilized and generally suited for low-quality products. The current analysis reveals the extraction of protein from FW is a many-sided (complex) issue, and that identifies for a stronger and extensive integration of diverse extraction perspectives, focusing on nutritional quality, yield, and functionality of the isolated protein as a valued recycled ingredient.     

Clinical significance of contact lens related changes of ocular surface tissue observed on optical coherence images

PurposeTo investigate the relationship between the real contact lens imprint into the conjunctival tissue, observed by optical coherence tomography (OCT) and conjunctival staining and contact lens wearing comfort.Methods17 participants (mean age = 26.6 SD ± 3.6 years; 7 females) were fitted with three different contact lenses base curves of the same silicone hydrogel custom lens type (Visell 50; Hecht Contactlinsen, Au, Germany) in a randomised order. One lens was optimally fitted according to the manufacturer's recommendation, one fitted 0.4 mm flatter and one fitted 0.4 mm steeper. After 4 h of lens wear the contact lens edge in the area of the conjunctiva was imaged nasally and temporally using OCT (Optovue iVue SD-OCT). To correct the artefact due to optical distortion with OCT, the imprint of all worn lenses was measured on a glass plate afterwards. Conjunctival staining in the limbal region after 4 h of lens wear was classified using the CCLRU Grading Scale. Comfort scoring was based on visual analog scales from 0 (very poor) to 100 (excellent).ResultsThe mean conjunctival imprint of all contact lens edges was 32.0 ± 8.1 μm before and 7.3 ± 6.5 μm after distortion correction of the OCT images. The distortion corrected conjunctival imprint with the 0.4 mm steeper lens (11.5 ± 6.2 μm) was statistically significantly greater compared to the optimally fitted lens (6.5 ± 5.9 μm) (One-way ANOVA followed Tukey-test; p = 0.017) and greater compared to the 0.4 mm flatter lens (3.9 ± 5.3 μm) (p < 0.001). There was no statistically significant difference between the optimally fitted lens and the 0.4 mm flatter lens (p = 0.209). The nasally measured imprint (11.4 ± 9.0 μm) was significantly greater than the temporally measured (3.3 ± 7.6 μm) (p < 0.001). There was no statistically significant correlation between the amount of conjunctival imprint and the graded conjunctival staining (p = 0.346) or the wearer’s comfort (p = 0.735).ConclusionsContact lens edges imaged by OCT exhibited displacement artefacts. The observed conjunctival imprints are a combination of real conjunctival compression and artefacts. A deeper imprint of the contact lens into the conjunctiva caused by a steeper base curve was not related to clinically significant staining or changes in comfort after 4 h of lens wear. The observed differences between nasal and temporal imprint are likely to be caused by variations of conjunctival thickness and the shape of the underlying sclera.     

Effects of direct current magnetic field treatment time on the properties of pork myofibrillar protein

This study investigated the effects of direct current magnetic field (DC-MF) treatment time (1, 3, 5, 8 h) on properties of porcine myofibrillar protein (MP). Gel water-holding capacity increased from 83.40% to 87.20% when DC-MF-treatment time changed from 1-h to 8-h. The 3-h treatment time of DC-MF was found to promote MP unfolding, rearrangement and aggregation, leading to the loss of total sulfhydryl, the increase of reactive sulfhydryl, surface hydrophobicity, turbidity as well as the formation of MP clusters and the greater degree of crosslinking as compared with 0-h treatment, thus a firmer and more ordered MP gel network for trapping more water. However, excessive DC-MF treatment (8-h) weakened DC-MF effect on MP aggregation as well as gel network and texture. This study has shed light on the effects of DC-MF treatment time on MP properties and provides useful information for the application of DC-MF in the food industry.     

A DFT study on enhanced adsorption of H2 on Be-decorated porous graphene nanosheet and the effects of applied electrical fields

The adsorption of the hydrogen molecule on the pure porous graphene nanosheet (P-G) or the one decorated with Be atom (Be-G) was investigated by the first-principle DFT calculations. The Be atom was adsorbed on the P-G with a binding energy of ?1.287 eV to successfully establish the reasonable Be-G. The P-G was a poor substrate to interact weakly with the H₂, whereas the Be-G showed a high affinity to the adsorbed H₂ with an enhanced adsorption energy and transferred electrons of ?0.741 eV and 0.11 e, respectively. A molecular dynamics simulation showed that the H₂ could also be adsorbed on the Be-G at room temperature with a reasonable adsorption energy of ?0.707 eV. The interaction between the adsorbed H₂ and the Be-G was further enhanced with the external electrical fields. The applied electrical field of ?0.4 V/Å was found to be the most effective to enhance the adsorption of H₂ on the Be-G with the modified adsorption energy and the improved transferred electrons being ?0.708 eV and 0.17 e, respectively. Our study shows that the Be-G is a promising substrate to interact strongly with the H₂ and could be applied as a high-performance hydrogen gas sensor, especially under the external electrical field.     

Compression properties of gas diffusion layers and its constitutive model under cyclic loading

The compressive deformation of gas diffusion layer (GDL), which is highly nonlinear and related to the loading history, affects the performance of PEM fuel cell stacks. However, linear elastic models are widely used. In this study, a new nonlinear constitutive model is proposed to describe the compression properties. Macroscopic studies reveal that GDL has different mechanical properties during the first and repeated compression stages. Besides, the tangent modulus has a significant linear relationship with stress. The constitutive model can be rebuilt using the micro-mechanical theory of fiber assemblies by considering the bending of carbon fibers. Furthermore, a prediction method is proposed to describe cyclic compression behavior. The prediction results fit well with the test results with an average and maximum relative error of less than 5.30% and 18.13%, respectively. These conclusions are beneficial to the design of GDL with specific mechanical properties and the real-time analysis of PEM fuel cell.     

Electrolyte flow optimization and performance metrics analysis of vanadium redox flow battery for large-scale stationary energy storage

Vanadium redox flow battery (VRFB) is the best choice for large-scale stationary energy storage, but its low energy density affects its overall performance and restricts its development. In order to improve the performance of VRFB, a new type of spiral flow field is proposed, and a multi-physics coupling model and performance metrics evaluation system are established to explore the electrolyte distribution characteristics. The results show that the new spiral flow field can effectively improve the uniformity of electrolyte flow and alleviate the phenomenon of local concentration polarization as compared with the traditional serpentine flow field and parallel flow field. Due to the long flow channel and large pressure drop, the system efficiency is low. However, coulombic efficiency, voltage efficiency and energy efficiency are significantly better than the traditional flow fields. Therefore, the novel flow field has obvious advantages in the application of small stacks.